Lightwave Communications USB SuperSwitch Manuel d'utilisateur télécharger pdf (Page 11)

Lightwave Communications USB SERVERSWITCH

www.lightwavecom.com Page 11 of 25

3.1.2 Main Menu: Jump to Port...

Jump to Port - Jump directly to any port from the Main Menu by entering either

the port name or port number. Select Jump to port and press Enter.

Lightwave Communications Inc.

Curr: File Server 1

USBss System Setup

no Auto scan

Jump to port...

Disabled

File Server 1 1

File Server 2 2

Print Server 3

Email Server 4

Engineering 5

Enterprise 6

Firewall 7

Fax Server 8

Next unit Esc exits

The screen will change to the following 'Enter port' prompt:

no Auto scan

Enter port:

Disabled

Enter the port name or port number, and press Enter. You will be immediately

switched to that port (if available) and exit the on-screen mode.

NOTE: When entering the port name, make sure you enter the name as

case sensitive if “Case sensitive names” is selected in the System

Setup menu. If you would like to enter names ignoring case, select

“Ignore Case in Names” in the System Setup menu.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Pas de commentaire

Lightwave Communications USB SuperSwitch Manuel d'utilisateur Page 11